Custom Golf Netting Enclosures
Gourock.com specializes in supplying customized netting productions for a variety of unique uses, including many golf hitting and golf ball containment applications. In many instances, the golf nets that we ship out for our customers are being used within golf cage frames or being used for typical golf cage installations. Golf cage nets primarily are used for driving full-velocity drives and shots from a close-range distance, and are to block, catch, and contain the golf balls within the space. Typically a golf cage netting enclosure will incorporate impact and barrier netting for both sides, the top/ceiling, and the back end (all seamed together with rope borders).
Gourock offers golf cage netting enclosures that are built per-order, according to your own preferred sizing and dimensions. Any height, width, and overall length can be fabricated and shipped out, and ordering online is efficient and easy directly through our Online Custom Golf Cage Netting Calculator:
Built from the highest quality DuPont® Type 66-728 Twisted-Knotted Nylon Netting, the custom golf nets available from Gourock are 100% Made In The USA, and are fabricated per-order. The mesh size that is used for golf impact and direct containment netting is a 3/4″ mesh, and there are two twine thicknesses available to select from – which are #15 (1.8mm, 144 lb./tensile) and a heavier #21 (2.0mm, 241 lb./tensile). Most golf cage nets also utilize a secondary reinforcement netting panel that covers the entire back-end of the netting enclosure, which is called an impact net. The impact net aids in reinforcing the back of the cage netting that ends up taking the majority of the wear-and-tear from golf shots, and are composed from the heavier #21 X 3/4″ knotted nylon netting. The Custom Golf Cage Netting Calculator provides the option to add the secondary impact panel net to the overall job.
Many of the custom golf cage nets that are supplied by Gourock.com are pretty straightforward in general design, and simply feature the specified dimensions needed. However for many customers there are quite a few customized design aspects that are incorporated into the overall production, including:
- tapers and angles
- additional reinforcement ropes installed
- weighted rope bottom edges
- combinations of twine thicknesses for the netting walls/ends
- divider panel nets
- fully-enclosed designs
- portals, door areas, and notches